الايبوكسي والراتنج

Our extensive experience in various application scenarios and transportation has enabled us to excel in delivering epoxy resin solutions that are tailored to fit your unique needs. We are committed to providing innovative solutions that exceed your expectations, ensuring utmost satisfaction. With our expertise, you can trust us to deliver exceptional quality and reliability every time.

احصل على عرض أسعار

Fast-drying Epoxy Resin&Hardener

UV resistant
Easy to mix and apply
Low-odor and zero-VOC
High gloss & durable
Low viscosity

A:B=2:1
MIX RATIO
15-25min
OPERATING TIME
1h(60℃)
CURING TIME
قابلة للتخصيص
تصميم كل شيء

Manufacturing of Laminating

Prepare the workspace
Make sure your workspace is clean and well-ventilated, you will also need to have all the necessary materials and tools within reach.
Cut the carbon fiber
Use a pair of sharp scissors or a razor blade to cut the carbon fiber material to the desired size and shape
Mix the epoxy resin and hardener
Follow the instructions on the packaging of the epoxy resin and hardener to mix them together
Apply the epoxy resin and hardener
Use a brush to apply the epoxy resin and hardener onto the carbon fiber material. Make sure the resin is evenly distributed
Lay the carbon fiber
Once the resin has been applied, it's time to laminate the carbon fiber. Lay the carbon fiber onto your mold or desired surface, making sure to position it carefully and avoid any wrinkles
Apply more epoxy resin and hardener
Apply a second layer of epoxy resin and hardener over the carbon fiber. This will help to further bond the fibers together
Allow the material to cure
Wait for the epoxy resin and hardener to cure. This may take several hours or even overnight
Trim and finish
Once the material has cured, you can trim and finish it as desired.

Vacuum InfusionEpoxy Resin

Vacuum infusion is a process used in manufacturing to create high-quality composite materials. It involves using a vacuum pump to remove air from a resin and fiberglass cloth or carbon fiber weave, allowing the resin to penetrate each fiber and bond them together for maximum strength and durability.

This process involves laying out the carbon fiber in a mold, sealing it with a permeable fabric, and placing it inside a bag. A vacuum pump is then used to draw out the air, allowing the resin and hardener to flow into the mold. Finally, the mold is cured under controlled conditions to create a strong, durable finished product. This precise and efficient process creates high-quality composite materials with excellent strength-to-weight ratios.

Prepreg-special Resin

ICT-YZ-05 resin is a solvent-free epoxy resin, added with a special epoxy resin, with the physical characteristics of high strength, high toughness, high impact resistance, with good operation and fit.After research and development, the resin system can provide more comprehensive test data, and it is widely used in high-performance fibers.

قوة استثنائية 98%
متانة 98%
المقاومة 95%

كيفية الحصول على عينات مجانية

الخطوة 01

اتصل بنا
عند الاتصال بنا، يرجى تقديم نفسك وتوضيح سبب اهتمامك بموادنا المركبة.
توفير المعلومات اللازمة
كن محددًا بشأن احتياجاتك ومتطلباتك حتى نتمكن من التوصية بالمواد المركبة الأكثر ملاءمة.

الخطوة 02
الخطوة 03

اطلب العينة المجانية
بمجرد تقديم جميع المعلومات اللازمة، يمكنك طلب عينة مجانية من مواد الألياف عالية الأداء لدينا.
تقييم العينة
بمجرد استلام العينات، قم بتقييمها جيدًا للتأكد من أنها تلبي احتياجاتك ومتطلباتك.

الخطوة 04

تحديد

المعلمات الأساسية

رقم الموديل:	ICT-R03-R11
الاسم التجاري:	مواد التأثير
مكان المنشأ:	تشجيانغ، الصين
Shelf Life:	6-12 months
MOQ:	1 set